Sanyo DVD-DX518, Инструкция по эксплуатации

Страница: 4 / 23

TO REDUCE THE RISK OF ELECTRIC
SHOCK OR FIRE, DO NOT OPEN THE
COVER. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT NOTES
For Your Attention
The lightning flash is intended to alert the user to the presence of dangerous
voltage within the product's enclosure, and touching the internal components
may result in a risk of electric shock to persons.
-3-
Please read through this manual before making connections and operating this
product. Retain this manual for future reference.
Don't open the cabinet of this unit. No user-serviceable parts inside. Refer servicing
to qualified personnel only.
Switch off the unit when you don't use it. Switch off the unit and disconnect it from
the AC power supply when it is not being used for a long time. (Plug, as the
disconnected device entirely with power source, should keep in easy-to-operation in
daily life.)
Don't install the unit in a place exposed to heating sources or direct sunshine.
Don't install the unit in a place exposed to moisture or rain.
The apparatus shall not be exposed to dripping or splashing and any object filled
with liquids, such as vases shall not be placed on it.
Install the unit on a horizontal, flat and firm surface with good ventilation. Never
block the vents which will cause malfunction resulting from overheating.
Use a soft and clean cloth to clean the outside of the unit . Never clean it with
chemicals or detergent.
This book is only a guide for user's operation, not a criterion for configuration.
Do not install this apparatus in a confined space,such as a book case or built-in
cabinet.Minimum distance (about 100mm) around the apparatus for sufficient
ventilation.
To be completely disconnected the power input,the mains plug of apparatus shall be
disconnected from the mains.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine,
fire or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced.Replace only with the
same or equivalent type.
The exclamation mark is intended to alert the user to the presence of
important operating instructions.
The following two labels are on the back
of the main unit: