Before Operating (Continued)
On-Screen Display
General Explanation of the On-Screen
Display
This manual gives basic instructions for operating the
VCR/DVD Recorder. Some DVDs require specific oper-
ations or allow only limited operations during playback.
When this occurs, the symbol
appears on the TV
screen indicating that the operation is not permitted by
the VCR/DVD Recorder or is not available on the disc.
Displaying Information on-screen
You can display various information on-screen about the
disc or tape loaded.
On-screen display operation
11
Press DISPLAY repeatedly to display/change the
information displayed on-screen.
22
To remove the on-screen display, press DIS-
PLAY or RETURN repeatedly until it disappears.
See the following descriptions for detailed explana-
tions while playing a disc.
Temporary Feedback Field Icons
Resume play from this point
Action prohibited or not available
otes
Some discs may not provide all of the features on the
on-screen display example shown below.
If no button is pressed for 7 seconds, the on-screen
display disappears.
Displaying OSD While Watching TV
While viewing the TV, press DISPLAY to
display/remove the information displayed
on-screen.
Example- when a DVD-RW in VR mode is inserted:
Changing TV Channels
If no disc is playing, you can change TV channels using
the number or CH/TRK (
v
/
V
) buttons on the remote
control, or the CHANNEL (
v
/
V
) buttons on the front
panel.
ote
Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.
Changing TV Audio Channel
Some TV programs are broadcast with both a main and
a Secondary Audio Program (SAP). You can change the
TV audio using the AUDIO button.
Press AUDIO repeatedly to change the TV audio
according to Broadcast audio signal as shown
below.
• SAP Audio Signal
Stereo
→
SAP
→
Mono
→
Stereo
• STEREO Audio Signal
Stereo
→
L
→
R
→
Mono Stereo
• SAP Audio Signal
Mono
→
SAP
→
Mono
• MONO Audio Signal
Mono
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio (mono or
stereo) channel.
• If the sound is of poor quality when set to Stereo, you
can improve it by changing to Mono.
• When an external input is selected, the audio channel
can be switched only to Stereo.
27
HOOKUP
DVD-VR
VR Mode
SP
1H 32M Free
28/8/2003
Mono
11:35 AM
MONO
DVD
ch. 6
Indicates disc type.
Indicates channel
number and
audio input
signal received
by the tuner.
Indicates the record mode,
free space, and elapsed
progress bar.
Indicates current date and time.
Indicates output audio signal.