LVDS cable
– 6 –
BACK CABINET REMOVAL
1. Remove 19 screws (C:3x10, 15 pcs.; D:4x8, 4 pcs.)
2. Detach AC cord from cabinet back.
3. Take off the cabinet back.
The board installed in the panel and the speaker are
installed in front cabinet.
CAUTION:
This LCD TV uses several different kinds of screws. Using the correct screw is necessary to prevent damage.
Lead wires must be redressed to their previous locations after servicing. The Earth sheet and gasket are
provided to prevent interference to other radio and television receivers. The Earth sheet and gasket should
be returned to its previous position after servicing.
STAND REMOVAL
Position TV face down on a padded or cushioned
surface to protect the screen and finish.
Remove 4 screws (A:6X30, 2pcs; B:6x40, 2pcs)
and remove the stand legs from the TV.
POWER UNIT REMOVAL
Remove 4 screws (E:3x6) to take the power unit off.
MECHANICAL DISASSEMBLY
Содержание DP42142
Страница 36: ... 30 䎳䎲䎺䎨䎵䎃䎥䏏䏒䏆䏎 䎃 䎃䏉䏒䏕䎃䎸䎶䎕䎭 BLOCK DIAGRAM POWER LINES ...
Страница 40: ... 34 IC6600_C0DBZYY00485 USB Protection IC6700_C0CBAYG00009_LM1117S ADJ IC6560_C0JBAA000502_TC7SET08FU ...
Страница 41: ... 35 IC5700_C3ABSY000102_IC H5PS5162GFR S6C IC6720_C0DBAYY01122_BD9328EFJ E2 ...
Страница 46: ... 40 IC DIODE AND TRANSISTOR PIN LAYOUTS ...