If you are using an iPod without a docking port or other MP3 player or other portable audio device, you can still
play it through the clock radio via the AUX IN Jack.
NOTE: To use the AUX IN Jack, make sure no iPod is docked in the clock radio.
Plug one end of the audio connecting cable into the
AUX OUT Jack
on your device and the other end of the
connecting cable into the clock radio
AUX IN Jack
, located on the back of the unit.
Press the
PLAY/PAUSE Button
on the clock radio (or
PLAY/PAUSE Button
on the remote control). The
AUX Icon
will appear, indicating AUX playing mode.
Turn on and play your device.
Press the
VOLUME UP or DOWN
on the clock radio (or
and Volume- Button
on the remote
control) to adjust the system volume. You may need to adjust your device volume, too.
To turn off the unit, press the
POWER Button
(or
POWER ON/OFF Button
on the remote control). Please
remember to turn off your device, too.
1.
2.
3.
4.
5.
Note: Extend FM wire antenna fully for best FM reception (do not strip, alter or attach to other antennas). The
AM loop antenna should be placed up to 12" away from the unit for best reception. Rotate the AM loop antenna
as required for best AM reception.
Listening to a non-docking iPod or other portable audio devices
Listening to Radio
10
Press the
BAND/RADIO Button
on the clock radio to play the radio. The radio frequency appears at the
lower of the display. Press the
BAND/RADIO Button
on the clock radio repeatedly to select AM or FM band.
Press the
SKIP FORWARD or BACKWARD Button
on the clock radio (or or
Button
on the remote
control) to tune in the desired station. Press the or
Button
on the remote control again to Auto
scan to the next clear station. Hold for seek mode.
Press the
ST/MONO Button
(or
ST/MONO
on the remote control) to ST/MONO switches the receiver
between FM stereo and mono modes. Mono reduces the noise heard when listening to weak FM stations.
Press the
VOLUME UP or DOWN Button
on the clock radio (or
and Volume- Button
on the
remote control) to adjust the system volume.
Press the
MUTE Button
on the remote control to turn OFF the sound. Press the
MUTE Button
again or
/- buttons
on Handset to restore the sound.
To turn off the unit, press the
POWER Button
(or
POWER ON/OFF Button
on the remote control) to turn it
off.
1.
2.
3.
4.
5.
6.
