Sanyo DC-MP9500, Инструкция по эксплуатации

Страница: 8 / 12

-6-
Changing a programme
To change a track
1. In the stop mode, press the MEMORY button repeatedly until the track
number to be replaced is displayed.
2. Press the f or e button to select a track as explained above.
3. Press the MEMORY button.
Note:
-
Programmed details cannot be partially deleted or inserted.
To add a new track to a programme
1. In the stop mode, press the MEMORY button repeatedly till
“-- -- -- -- . -- --” appears.
2. Press the f or e button to select a track as explained above.
3. Press the MEMORY button.
Cancel programme
- Press the
n
button once in the stop mode to cancel programmed play.
- After opening the disc tray, the programme contents will be cleared
away.
MP3 CD PLAY
This unit can play back the CD-R/RW that has recorded music data or
MP3 files. Before playing back MP3 CD, please read the following.
MP3 CD information
- MP3 CD is the disc that standardized by ISO9660, its file name must
have the extension letters, “.MP3” or “.mp3”.
- Standard, sampling frequency, and the bit rate:
MPEG-1 Audio, layer 3
32kHz, 44.1kHz, 48kHz
32kbps - 320kbps (constant bit rate or variable bit rate)
- The recommend recording setting for a high-quality sound is 44.1kHz
of sampling frequency and 128kbps of constant bit rate.
- The directory and file names of the MP3 CD must be corresponded to
the ISO standardized files.
- Single-session disc can be played back.
- This unit can recognize up to 250 folders or 500 files per disc.
The CD disc with 251 folders or 501 files and over is not available to
this unit.
- This unit can recognize up to 8 directory trees per disc.
- MP3 CD may not be played in the recorded order.
- Music section in “CD Extra” can be played back, not Data section.
- “Mixed CD” can’t be played back.
Notes on disc writing method
There are three basic methods for writing to a CD: “Track-at-Once”, “Disc-
at-Once”, and “Packet Writing”.
Music files recorded by “Track-at-Once” or “Disc-at-Once” can be played
back on this unit. (Note: The unit can’t play back the music files added
with “Track-at-Once”.)
Music files recorded by “Packet Writing” can’t be played back.
Limitations on display
Available letters for display are the following: capital alphabets of A through
Z, numbers of 0 through 9 and _ (underline).
MP3 CD directory sample
Playback order: song01 v song02 v ... v song14
Folder number F01
There is no MP3 file. The unit skips it.
MP3CD F01 albumF01
song01.mp3
song02.mp3
doc01.doc
song03.mp3 photo01.jpg
song04.mp3
song05.mp3
F02 albumF02
F04 albumF04
song06.mp3
song07.mp3
song13.mp3
song08.mp3 song14.mp3
song09.mp3
song10.mp3
F03 albumF03
song11.mp3
song12.mp3
Note:
- Some MP3 CDs can’t be played back depending on the recording
conditions.
- The CD-R/RW that has no music data or non-MP3 files can’t be played
back.
- Do not make an empty folder. It may not work correctly.
- In this model, recommend recording setting is 44.1KHz of the sample
frequency and 128kbps of constant bit rate. If files are recorded in
other bit rate (for example: 320kbps) or in variable bit rate, track-jump
may sometimes happen according to recording conditions.
MP3 CD Play
1. Turn the power on and choose CD function.
2. Load the MP3 CD.
The total number of folders and tracks
appear on the display.
3. Press the TUNER PRESET/FOLDER
SELECT button (or the PRESET/
FOLDER SELECT button on the re-
mote control) to select the desired
folder.
4. Press the
f
or
e
button to select the desired track.
5. Press the i button to start play, the
track number and elapsed playing
time will display on the screen.
Display selection
The ID3-Tag is an information field for MP3. Music title, artist name and
album name can be stored into the tag. This unit shows these information.
Press the FM MODE/DISPLAY button on the main unit (or the DISPLAY
button on the remote control) during play.
-
Each time the button is pressed, the display changes in the following
sequence.
Folder name (Album name)/File name (Music name)
Music information: music title
Music information: artist name
Music information: album name
- If no music information is stored, “NO INFO” appears. Press this but-
ton again, the track number and elapsed playing time appear.
Folder selection
Example: There are 3 folders in MP3 CD.
- In stop mode, press the TUNER PRESET/FOLDER SELECT button
(or the PRESET/FOLDER SELECT button on the remote control)
repeatedly to select desired folder number. The folder number will
display in recycle:
1
v 2 v 3 v 1 v 2 v 3 v 1 v ...
When desired folder is selected, press the
i
button to start play
from the first track of this folder.
- In playing mode, do the same operation and the same folder display
order in turn. But when the last folder is in, other folders cannot be
selected in recycle order. Press the
n
button to go into stop mode.
- After selecting the desired folder in the playing mode, the unit will play
the first track in it.
Desired folder
Track number Elapsed
playing time