background image

(UK) 1AD6P1P20

87-BA

 

SANYO Electric Co., Ltd.

GUARANTEE TO CUSTOMER

Sanyo Europe Ltd. (the Company) guarantees to the initial retail
purchaser that if this equipment is or becomes defective and that,
in the opinion of the Company, the defect is due to faulty material
or workmanship the Company will, for a period of 12 calendar
months from the date of sale to the original purchaser repair or
replace, at its sole option, free of charge, any such defective
component part of the equipment, always provided that: -

1

. The equipment has at all times been used in accordance with

the operating instructions issued by the Company, and has not
been connected to an electrical mains supply for which it has not
been adjusted.

2

. Accidental damage, or damage caused by negligence or

misuse by the user, including leakage from exhausted batteries, is
specifically excluded.

3

. Unauthorised repairs, or any modification to the equipment

which has not been expressly approved by the Company, shall
render this guarantee null and void.

4

. Failure due to fair wear and tear of any item, such as batteries,

record playing styli, and tape recording, playback and erase heads
is specifically excluded.

This guarantee is not transferable and is only applicable within the
United Kingdom (and the Republic of Ireland). Nothing in this
express guarantee affects the statutory rights available to the
purchaser of this equipment.
Note: This guarantee supersedes any other form of guarantee
that may inadvertently have been enclosed with or attached to the
product. (August 1978).

Thank you for buying Sanyo. This equipment should give you

many years of pleasure and faithful service but in the event that a
fault occurs, the following notes for your guidance may be helpful:-

1

. PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH WILL

BE REQUIRED FOR SERVICE DURING GUARANTEE.

2

. If your Sanyo equipment proves faulty during the period of

guarantee, take it or send it back to the dealer who originally
supplied it together with this guarantee and the proof of purchase.
We have made arrangements with our approved dealers under
which they will carry out in-guarantee service repairs on our behalf.
In this way, we hope to reduce to a minimum the amount of time
you will be without your equipment.

3

. If for some reason it is impossible to return the equipment to the

original supplies, please contact our Consumer Relations Depart-
ment at the address below for further advice.

4

. Should the equipment require servicing after the expiry of the

guarantee period, take or send it to the original supplier or any
other Sanyo dealer. He will be pleased to give you a quotation for
the repair. If you are in any doubt about what to do, write to us at
the address below or telephone:

Consumer Relations Department,
Sanyo Europe Ltd.,
18 Colonial Way,Watford
WD24 4PT
Tel: Watford 246363

R

6

Содержание DC-MP9500













Отзывы: