8
Automatic/Manual tuning
1. Press the FUNCTION button to select “TUNER” function.
2. Press the TUN/BAND button to select FM or AM. The radio
frequency appears on the display.
3.
Automatic tuning
Press the
f
or
e
button for at least 1 second to tune in a
station. The unit will scan down or up the band and receive the next
receivable station. Press the button again to continue.
Manual tuning
Press the
f
or
e
button brie
fl
y until the desired frequency is
displayed.
To preset stations
Up to 30 stations for FM band, 10 stations for AM band can be preset.
1. Tune in the station to be preset as described above.
2. Press the PROGRAM/CLOCK button. The preset channel number
blinks on the display.
3. Press the FOLDER/C or - button to select a channel be
preset.
4. Press the PROGRAM/CLOCK button
-
In this example, “89.80 MHz” FM station is preset on FM
channel 9.
5. Repeat steps above to add more preset stations.
When presetting a new station, the previous preset station is cleared.
Listening to preset stations
1. Press the TUN/BAND button to select FM or AM.
2. Press the FOLDER/C or - button to select the desired
channel number.
- The number buttons on the remote control can also be used.
To receive FM stereo broadcasts (Remote control
only)
“
” appears when an FM stereo broadcast is received. If not, press
the FM MODE button to turn the “
” indication on.
- If the signal from an FM stereo station is weak and reception is poor,
press the FM MODE button to change to the monaural mode. The
reception may be improved, but the sound will be monaural.
LISTENING TO TAPE
1. Press the FUNCTION button to select “TAPE” function.
“TAPE”
appears.
2. Pull the OPEN
A
portion to open the cassette button cover.
3. Press
the
N
/
Q
button to open the cassette holder.
4. Load the cassette. After loading the cassette, push the cassette
holder back into position.
5. Press the
A
button to begin play.
6. Press the
N
/
Q
button to stop play at any time. Press it again to
remove the cassette.
When the end of the tape has been reached, automatic stop will be
activated.
Note:
- Use the normal tape (TYPE 1).
- Endless tapes cannot be used.
- Do not use C-100 (or longer) tapes. They may jam in the
mechanism.
Pause
Press the
K
button to temporarily stop playback or recording. Press it
again to resume operation.
Fast forward and rewind
Press the
C
or
D
button. When the desired location has been
reached, press the
N
/
Q
button.
Automatic stop system
At the end of the tape while recording or playing back, the cassette deck
stops automatically and the buttons are released.
This system does not work in fast forward and rewind operation. Be sure
to press the
N
/
Q
button when the end of the tape has been reached.
Example (When using C-60 tape):
Press the
N
/
Q
button after approximately 2 minutes have elapsed under
fast forward and rewind operation.
LISTENING TO THE RADIO
LISTENING TO OTHER SOURCES
1. Press the FUNCTION button to select “AUX”.
2. Follow the instructions supplied with the video/auxiliary equipment.
1465AUEnglish.indd 8
1465AUEnglish.indd 8
2008-7-28 10:00:21
2008-7-28 10:00:21
