Sanyo CP29KX2Z, Инструкция по эксплуатации

Страница: 11 / 24

Colour and Sound System
11
Normally, set the colour system to “AUTO”, if the
clear picture cannot be obtained even when the
broadcasting or AV signal is received, press the
RECALL button or COLOUR SYSTEM button
repeatedly until the optimum image can be pro-
duced.
(Refer to
Broadcast Transmission System List
indicated by the last of this page in a setup of
Colour System.)
Note: A colour system entry to the memory
cannot be made during TV mode, make it during
Semi-auto or manual tuning mode. (Refer to
page 15.)
6
PAL
To set the sound system, make it during Semi-Auto
Tuning or Manual Tuning mode. (For further details
concerning this operation refer to page 15.)
When the sound is not clear or no sound is pro-
duced on a programme number position, select
sound system repeatedly until the optimum sound
is obtained.
(Refer to
Broadcast Transmission System List
indicated by the last of this page in a setup of
Sound System.)
BG
(5.5MHz)
DK
(6.5MHz)
I
(6.0MHz)
M
(4.5MHz)
SEARCH
SYSTEM
SIF
MODE
POSITION
SEMI
START
2
AUTO
SKIP
MEMORY OFF
- -
BG
SELECT ADJUST BACK
P P
M EXIT
2) To enter a sound system selection into
the memory, select “MEMORY” and press the
or - button.
(Semi-Auto or Manual Tuning mode )
SEARCH
SYSTEM
SIF
MODE
POSITION
SEMI
START
2
AUTO
SKIP
MEMORY OFF
BG
SELECT ADJUST BACK P P
M
EXIT
OK
Each time the RECALL button or COLOUR SYS-
TEM button is pressed, colour system changes
as follows;
Broadcast Transmission System List
Area Country
Sound
System
Colour
System
Middle
East
Asia
Oceania
PAL
B/G
Australia,
New Zealand, etc.
Union of Arab Emirates,
Kuwait, Oman, Qatar,
Yemen, Bahrain, etc.
Indonesia, Malaysia,
Singapore, Thailand,etc.
PAL B/G
China, etc.
PAL
D/K
Hong kong PAL I
Saudi Arabia,
Iraq, Iran, Lebanon,etc.
B/G
SECAM
Russian Federation,etc.
D/K SECAM
Myanmar, etc. M NTSC
6
AUTO
Setting of the Colour System
Setting of the Sound System
6
NTSC4.43
6
NTSC
To select sound system:
■
Press the SOUND SYSTEM button to
select the sound system directly. The sound
system will be memorized automatically.
1) Select “SIF” with the Programme UP
or DOWN button in the Semi-auto or
Manual Tuning mode.Then press the VOLUME
( + or - ) button to select a optimum sound
system
or:
INST. M_29-C4LWG(Aus) 6/22/04 7:59 AM Page 11