Sanyo CP21AF2X, Инструкция по эксплуатации

Страница: 17 / 24

17
L
R
AUDIO
AV1 INPUT
VIDEO
(MONO)
S-VIDEO
MONITOR
OUT
■
When the L/R audio channel is selected in the AV mode, each time the SURROUND
button is pressed (or selection of On-screen Menu), surround mode is changed as
follows; “
SURROUND 1” , “ SURROUND 2” and “ SURROUND OFF” .
L/R
R/R
Connecting other Equipment
VCR for playback
Connect the video and audio outputs of a VCR, video disc player, etc. to the input jacks of
this TV set . Tapes and discs can be played back.
PLAYBACK
■
To watch the AV1 video input picture, select AV1 position by pressing the TV/AV Selector .
AV1
To video and audio outputs
Connecting to the Rear AV1 Input Jacks
■
If the audio signal from a VCR is stereo, be sure to connect the right and left channels
to the respective right and left AUDIO-IN terminals. Then select “
L/R ” channel of the audio
channel in the TV set with the remote control STEREO/MONO button.
L/R
TV mode
Each time the TV/AV Selector is pressed, AV position is
changed as follows;
AV1
AV2
28
Each time the STEREO/MONO button is pressed, audio
channel is changed as follows;
L/L
SURROUND OFF
SURROUND 1
SURROUND 2
“SURROUND 1” is normal surround mode.
Selection of “SURROUND 2” obtains a
deeper surround effect.
■
If the external equipment is a monaural one, connect it to the left terminal of AUDIO IN.
Then select “
L/L ” channel of the audio channel in the TV set with the remote control
STEREO/MONO button.
INST. MANUAL-C2GW(Aus) 02.7.19 10:29 AM Page 17