Sanyo CE42SR1, Инструкция по эксплуатации

Страница: 11 / 68

11
Common specification
Power source 100~240V 50Hz / 60Hz
Colour system PAL NTSC3.5 ,SECAM
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to
pin 14) and audio-L/R
Output: composite video and audio L/R
AV2: BNC
Input: RGB, H and V / Y, Pb, Pr and audio L/R
Output: RGB, H and V / Y, Pb, Pr
AV3: BNC
Input: Composite video
Output : Composite video
Audio Monitor.Out: CINCH L/R
Audio Speaker out: 2 x 6W
DVI Input : DVI-D GROUP Standard
PC Input: Mini D-SUB 15 PIN and
Audio 3.5mm Jack
Serial port: RS232C: Input / Output
Net Organiser: POA-LN01 (optional)
When ordering these products, give the Name and Type No. to the
sales dealer.
Contrast Ratio 1200:1
Screen(inches/ cm) 42” / 107 cm
(viewing measured
diagonally)
Display Native Resolution 1366 x 768 (WXGA)
Viewing angles H:178°, V:178°
Dimensions (WxHxDmm) 1027x620x167.5
Weight (kg) 40
NO PICTURE, NO SOUND
Check if monitor is plugged in.
Check monitor is not in standby mode
POOR PICTURE, SOUND OK
Adjust BRIGHTNESS/ CONTRAST LEVELS (too low).
NO COLOUR, PICTURE OK
Adjust COLOUR control.
Check lead connections
Does the signal input have colour
REMOTE CONTROL DOES NOT WORK
Check batteries are inserted correctly
Check condition of batteries
Check to see if remote control inhibit is set ON
PICTURE OK, NO SOUND
Check external speakers are connected correctly
Check lead connections to external equipment
Volume turned down or mute selected
SPECIFICA SPECIFICA TIONS / HELPFUL TIONS / HELPFUL HINTS HINTS
GB
GB
Specification
Helpful hints
Model: CE42SR1