5
1
. The LCD display will have a Standby light to show there is power.
2. Control buttons (bottom edge of cabinet)
Menu/F button:
rotate between contrast, Brightness, color and
sharpness
Input/OK button: s
witch between AV1, RGB, AV2, AV3, HDMI
and PC mode.
e d
buttons:
adjust Menu/F options
4
button:
To switch from display to standby mode (to switch off
completely disconnect the monitor from the power supply)
Many of your monitors functions are controlled through the menu
function.
During menu operation, the bottom of the screen will show which
controls can be used.
Press the
u
button to
enter
the main menu.
A sub menu is selected using the
e
or
d
button
and pressing the
8
button
when the required sub menu is highlighted.
When you have set a Sub menu you can press the
MENU button
to
exit, then the
MENU button
again to exit the main menu.
1.
Press the
MENU button.
Select
Picture
using the
e
or
d
button.
Press the
8
button
to enter.
Set the picture settings for your “
personal”
preference.
2
. Use the
e
or
d
button
to select e.g. Brightness and the
7
or
8
button
to adjust levels.
3. Preset :
You can select either your
“Personal”
settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction:
May be used to reduce any local picture ‘noise’
(granular appearance) being experienced by Using
7
or
8
to select
between Mid / High / Auto / Low / OFF.
5. Dynamic skin tone:
May be used to enhance skin tone by using
7
or
8
to select between On / Off.
Tint :
is only available if NTSC equipment is connected.
6. Text Brightness:
May be adjusted by Using
7
or
8
button to
select between Min / Mid / Max.
To exit press the
MENU
button.
✐
Your personal settings are automatically saved when you exit the
menu.
INST
INST
ALLA
ALLA
TION
TION
Terminals
1
2
Picture menu
Brightness
Contrast
Color
Sharpness
Preset Personal / Dynamic / Standard / Eco
Noise Reduction Mid / Max / Auto / OFF / Min
Dyn. Skin
Text Brightness Max / Mid / Min
Tone ON / OFF
Child lock OFF / ON
Timer
AV2 setting RGB, H/V / Y Pb Pr
Off Time ON / OFF
Picture
: Select
: Adjust
MENU
: Back
Brightness
Contrast
Color
Sharpness
Preset Personal / Dynamic / Standard / ECO
Noise Reduction Mid / Max / Auto /
/ OFF
Dyn. skin tone ON / OFF
Text Brightness Min / Mid / Max
Min
Main Menu
Picture
Setting
: Select
: Adjust
MENU
: Exit
Menu Operation
Содержание CE42LM4WPN-NA - CE - 42" LCD Flat Panel Display
Страница 12: ...12 RS 232C COMMAND TABLES ...
Страница 34: ...34 RS 232C COMMAND TABLES ...
Страница 35: ...35 ...
Страница 36: ...36 Part No 1KA6P1P0347 N4JF Printed in U K ...
