-7-
C2WVV
OPTION SETTING
[After replacing the Memory IC (IC803)]
The memory IC, IC803, stores the option data of TV set and service adjustments data for each circuit, therefore,
when the memory IC is replaced, it should be performed following setting and “SERVICE ADJUSTMENT” on next
page.
To enter to the Option Mode
+ Press and hold the F/OK button on the remote control and P
▼
button on the front panel of the TV. The option
window will appear on the screen. Set the options as shown below.
To set the option mode
+ Highlight the desired option item by using the P
▲
or P
▼
button .
+ To switch the option mode, use the Volume - (LEFT) or (RIGHT) button.
+ The data which is set in the option mode is stored into the memory IC automatically.
Following table shows the available option items and default setting mode.
Exit from the Service Mode
+ Press the RECALL button.
Option Mode
Mode
Description & Note
ON-TIMER
ON or OFF
On-timer available, default “ON”
SORT MODE
AUTO TUNE/SORT
Tuning mode, default “AUTO TUNING”
or AUTO TUNING
or ATS EURO PLUS
PLUG & PLAY
ON or OFF
Plug & Play mode, default “ON”
WELCOME TEXT
ON or OFF
Display message when first set up, default “OFF”
CODE TEST
OFF or ON
For factory use, default “OFF”
WSS
ON or OFF
Wide Screen Signaling available, default “ON”
WIDE
ON or OFF
Wide mode, default “ON”
OPTION
4 or 7 LANGUAGE
Language option , default “4 LANGUAGE”
312/313 Mode
ON or OFF
Teletext mode, default OFF
AV3 OPTION
ON or OFF
Front AV disable, default ON
3D SURROUND
ON or OFF
3D Surround available, default ON
SIF OPTION
BG, I, L/L’ or BG or BG/DK
Television default system, Default “BG, I, L/L’”
OPTION
ON-TIMER
ON
SORT MODE
AUTO TUNING
PLUG & PLAY
ON
WELCOME TEXT
OFF
CODE TEST
OFF
WSS
ON
WIDE
OFF
OPTION
4 LANGUAGE
312/313 Mode
OFF
AV3 OPTION
ON
3D SURROUND
ON
SIF
BG ONLY
ADJUST : EXIT : RECALL
