Sanyo AVP-429, Инструкция по эксплуатации

Страница: 31 / 57

Adjusting MENU Options
Setting Channels
Accessing Channels Menu
1.
Press MENU ..................
2.
Highlight [
Channels
]...
3.
. .......... .... Press OK ..... ..
Use or button.
Settings
Locks
Guide
Picture
Audio
Master List
Favorites
Scan Channels
Find Channel
Channel Name Edit
Channels
Option Description
Select to display all available channels scanned by Auto
Program in initial setup. See [
Setting Channel List ] on this
page.
Selecting Channel
Options
Master List
Favorites
Scan Channels
Find Channel
Channel Name Edit
Allows you to setup favorite channels in 3 different
categories. See [
Setting Favorite Channels ] on next page.
Allows you to run Auto Program manually. You may need to
run Auto Program manually if you interrupt the Auto
Program process in initial setup. Please refer to [
Running
Initial Setup ] for the detailed steps.
You will be asked to input a correct secret number before you
access the [Channel Scan] screen.
Allows you to find channel manually by input the RF channel
number. Please contact your local station or cable operator
for this RF channel number information.
You will be asked to input a correct secret number before you
access the [Find Channel] screen.
Allows you to assign labels (such as station call letters) to a
selected channel. See [
Editing Channel Name ] on next page.
Setting Channel List
Master Channel List
Press OK to finish
Done
Digital Only
Unmark All
Mark All
2.0
2.1
2.2
3.0
4.0
4.1
KFOX-HD
KFOX-SD
KGO-DT
In the [Master Channel List] window, you may
mark or unmark the desired channels. Only
those channels marked with a tick symbol can
be selected by the CH+ or CH- button. The
unmarked channel(s) can be selected only by
0-9 number buttons.
Mark All: select to mark all channels.
Unmark All: select to unmark all channels.
Digital Only: Select to mark digital channels only.
Be sure to select [Done] if you finish setting channel list.
Also, you may access the master channel list by pressing the LIST button.
30
To highlight an option and to change settings, press ??? ?. Press OK to confirm the selection or alter the settings.
Press EXIT to exit.