Sanyo AVL-263, Руководство по обслуживанию

Страница: 39 / 41

Removing or Installing the Stand
Cautions:
1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful
installation.
2. Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from
being damaged.
3. Disconnect the AC power cord firstly.
To remove the stand:
(if wall mounting)
1
.Lay your TV flat (screen down) on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV
is not scratched.
2
.
Loosen the eight M4 screws on the Stand to remove the Stand. (Please keep these screws for future use if you want
to install the stand again.)
To install the stand
1
.Lay your TV flat (screen down) on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV
is not scratched.
!
Do not remove the stand from the TV unless using an optional bracket to mount it.
!
The appearance of the unit may differ from the actual one.
Note
3
.Place your TV upright.
2
. Align the locator holes in the stand with the locators on the TV back, and then align the holes in the stand column with the
holes in the TV back, and then secure the stand to the TV with eight M4 screws.
Loca o
t r
o Locat r hole
Use eight M4 screws to
secure the stand to the TV
Loosen the screws on the
Stand to remove the Stand.
Screws
Stand