Basic Operations
Changing Channels
Using the Channel Buttons (CH+ or CH-)
Press the
CH+ or CH-
to change channels.
When you press the
CH+ or CH-
, the unit changes channels in sequence. You will see all the channels that the
unit has memorized.
You will not see channels that were erased.
Direct Accessing Channels
Press the
number buttons
to go directly to a channel.
To select a one-digit channel: press the
0-9 number buttons
to input the channel number and press
ENTER
or
wait for some seconds to
go to the selected channel.
To select a two-digit channel: press the
0-9 number buttons
to input the channel number and press
ENTER
or
wait for some seconds to
go to the selected channel.
To select a three-digit channel: press the
0-9 number buttons
to input the channel number one by one, then the
unit goes to the selected channel.
When you use the number buttons, you can directly select channels that were erased.
Note:
Using the LAST button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL+ and VOL-)
Press the
VOL +
or
VOL-
to increase or decrease the volume.
Using the MUTE button
At any time, you can temporarily cut off the sound using the
MUTE
button.
Press the
MUTE
button and the sound cuts off.
1
To turn mute off, press the
MUTE
button again.
2
17
Selecting a MENU Language
Press
Menu
to exit.
5
Press
MENU
to display the menu main page.
1
Press
CH+
repeatedly to select
Display
page.
/-
2
Press
ENTER
or
VOL+/-
to access the submenu.
3
Press
ENTER
or
VOL+/-
to toggle between
English,
French
and
Spanish.
4
The
Language
item will be highlighted automatically.
Off
Bright
English
Off
Display
Language
Transparency
Back Light
Captions
CC When Mute
Move
Select
Menu to exit
Yes
Factory Reset
On
DCDi
Off
Full screen
Zoom
