Wiring
19
§
§
7
7
.
.
2
2
I
I
n
n
p
p
u
u
t
t
P
P
l
l
u
u
g
g
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
CAUTION
！
Wiring should be performed only by technically qualified personnel.
Incorrect wiring can result in electric shock and/or fire.
Check that the input power plugs are firmly seated.
Failure to do so can result in electric shock, fire, or bodily injury.
The input power plug must be grounded. Failure to ground it can result in
electric shock. Never use the UPS in the place where the UPS input power
plug cannot be grounded.
Proceed as follows to connect the input power plug of the UPS.
①
Check that
MAIN SW
is in the “OFF” position.
②
Connect the input power plug of the UPS to a utility power outlet.
UPS
の入力ﾌﾟﾗｸﾞは
2
極接地型です｡
Connect as follows if the utility power outlet is a 2-prong type (with no ground terminal).
Connection to the outlet with ground terminal
①
Insert the adapter to the outlet in the correct
direction as shown in the figure.
②
Connect the grounding wire to the ground terminal.
③
Insert the input power plug of the UPS to the adapter.
Connection to the outlet without the
ground terminal
When the ground terminal is not on the outlet,
the ground wiring by technically qualified
personnel is required. Contact your supplier.
Never use the UPS under the environment
where the ground wire cannot be connected.
Length: 1.8 m (71 inches)
Wrong direction.
Be sure to connect
the ground wire.
When using E11A102 and E11A152U
②
To 3-prong grounded
utility power outlet
E
E
1
1
1
1
A
A
1
1
0
0
2
2
Plug shape
(seen from prong side)
R
S(W)
E
E
1
1
1
1
A
A
1
1
5
5
2
2
U
U
When the AC input power is single-wire
grounded, always connect the ground phase
to the W terminal (S phase) side of the input
power plug on the UPS.
Note
①
MAIN SW
is “OFF”.
Length: 1.8 m (71 inches)
OUTPUT max.700W 10A
INPUT
MAIN SW
EXT.
EXT.
BATT
BATT
①
MAIN SW
is “OFF”.
