UPS Installation and Wiring
16
For installation and maintenance of the UPS, provide space of at least 1 m at the front
and at least 50 cm at the back.
Using the UPS horizontally requires dedicated brackets.
Contact your sales representative or SANYO DENKI.
Do not use the UPS in an unsecured state. There is the danger that the UPS will topple or fall.
§
§
6
6
.
.
U
U
P
P
S
S
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
a
a
n
n
d
d
W
W
i
i
r
r
i
i
n
n
g
g
Install the UPS in the installation location, and then insert the battery packs, attach the LCD panel, and perform the
wiring work. This work must be carried out following the instructions in this instruction manual.
The battery packs might be installed in the UPS unit at the time of shipment from the factory. In such a case, the weight
of the UPS unit 1 is 62kg, and UPS unit 2 is 64kg. Uninstall the battery packs, then install the UPS units. See Ҥ6.2
Installing the Battery Packs and Attaching the Front Panel” for details on installing the battery packs.
§
§
6
6
.
.
1
1
U
U
P
P
S
S
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
CAUTION
！
Installation should be performed only by service technicians.
Installation of the UPS must be carried out following the instructions in this
instruction manual.
Improper installation may result in electric shock, bodily injury, and/or fire.
In accordance with the instruction manual, install the UPS on a surface that can bear the UPS
weight (126 kg). This surface should be flat so that the UPS cannot topple or fall. The possibility of
vibration and shock should be minimized at the installation location. Vibration and shock such as
an earthquake may cause the UPS to move or fall, possibly resulting in bodily injury.
Wear safety shoes during the installation. All work that involves lifting the UPS, such as
mounting the UPS on a rack or attaching brackets, should be carried out by at least two persons.
Bodily injury may occur if the UPS is dropped. Take care not to strain your back.
Take care not to get your fingers caught when attaching brackets and installing the UPS.
There is the danger that the UPS could topple during relocation or installation.
Always hold the bottom side of the UPS firmly with both hands. Failure to do so may result in
injury or damage to the UPS.
§
§
6
6
.
.
1
1
.
.
1
1
C
C
h
h
e
e
c
c
k
k
i
i
n
n
g
g
t
t
h
h
e
e
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
E
E
n
n
v
v
i
i
r
r
o
o
n
n
m
m
e
e
n
n
t
t
Suitable installation environment: Temperature 0 to 40
°C
(32 to 104°F),
relative humidity 20 to 90%
Do not install the UPS in following locations.
In ambient environmental conditions other than those specified
in the product brochure and instruction manual, such as in an
extremely high or low temperature and high humidity.
Where the UPS is exposed to direct sunlight.
Where the UPS is directly exposed to the heat from a heat
source, such as a stove.
Where grounding is not possible.
Where the UPS may be subject to vibration or physical shock.
Near a device that may emit sparks.
In the presence of dust, salt or corrosive or flammable gas.
Outdoors
On a poorly ventilated rack (when the UPS is rack mounted.)
§
§
6
6
.
.
1
1
.
.
2
2
C
C
h
h
e
e
c
c
k
k
i
i
n
n
g
g
t
t
h
h
e
e
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
S
S
p
p
a
a
c
c
e
e
During installation, provide the following space around the UPS.
At least approx. 20 cm at the front and at least approx.15 cm at the back:
As air intake or exhaust space for the cooling fan.
At least 1 m from CRT displays: There is slight leakage of magnetic flux.
Allow some space from devices which might be affected by magnetic flux.
At least 20 cm
at front
At least 15 cm
at back
At least 1 m
！
Notes on UPS installation
The battery service life will be foreshortened
if the UPS is used in an environment where
the ambient temperature exceeds 30°C. We
recommend that the UPS is normally used
and maintained at a temperature between 20
to 25°C (68 to 77°F).
Note
Содержание Sanups A11J
Страница 1: ...10 kVA Instruction Manual M0011851 ...
