Page 19
If using the Trainer System with an SANWA SD-10G transmitter, please refer the SD-10G transmitter's Operating Manual
for more information on the correct setup and use of that transmitter's Trainer function.
Connecting the Master and Slave Transmitters
1) Turn both transmitters OFF.
2) Plug one end of the SANWA Trainer Cable (available separately) into the back of one SD-5G transmitter, then
plug the other end of the Trainer Cable into the second SD-5G transmitter or an SD-10G transmitter.
Activating the Trainer Function - Master (Instructor) Transmitter
1)
2)
MAS will be displayed in the Programming Window. The Battery Indicator will
If MAS is not displayed in the Programming Window, press the INC+/M1 or DEC-/M2 keys to display MAS.
Activating the Trainer Function - Slave (Student) Transmitter
1)
2)
MAS will be displayed in the Programming Window.
3) Press the INC+/M1 or DEC-/M2 keys to choose SLV. The Battery Indicator will
TRAINER setting range is MAS and SLV. The default setting is MAS.
Using the Trainer Function
1) The Trainer Cable should be connected between the two transmitters and the Trainer function on both transmitters should
be Activated as described previously. Both the Master transmitter and the Slave transmitter should be turned ON. If using an
SD-10G transmitter as the Slave transmitter, to save battery power the transmitter LCD Display can be turned ON, using the
DISPLAY key.
2) Turn on the model you're using for training and verify that the Instructor's transmitter
controls the model's control surfaces correctly.
3) Activate the Trainer function by pressing and HOLDING the Trainer button on the
Master transmitter continuously and verify that the Student's transmitter controls the
model's control surfaces correctly.
4) When the Trainer button is released, the Instructor will have full control over the model. When the Trainer button is held
continuously, the Student has control over the model. As soon as the Trainer button is released, the Instructor will have full
control over the model once again.
PROGRAMMING
TRAINER - TRAINER SYSTEM, CONTINUED....
Turn the Master (Instructor) transmitter ON. The Battery Indicator will falsh.
Press the MENU key to hoghlight the TRAINER menu. TRAINER will flash and
continue to flash and the Bind LED will be illumini\ated solid.
Turn the Slave (Student) transmitter ON. The Battery Indicator will flash.
Press the MENU key to highlight the TRAINER menu. TRAINER will flash and
continue to flash, but the Bind LED will go out.
