manualshive.com logo in svg

Sanwa PC710, Инструкция по эксплуатации

Поделиться
Скачать
Sanwa PC710 Скачать руководство пользователя страница 9

― 14 ―

― 13 ―

4-10 Test Leads Improper Connection Warning

The meter beeps as well as displays “InEr” to warn the user 
against possible damage to the meter due to test leads improper 
connections to the 

, or 

 measuring terminals when 

other function (like voltage function) is selected. (Temperature 
measurement function is an exception.)

Note:

“InEr” warning may be indicated due to weak battery even if the 
test leads are connected properly.

4-11 Crest capture mode (Sampling time: 1ms)

Press the CAPTURE button to activate the crest (Instantaneous 
Peak-Hold) mode to capture voltage or current signal duration 
which is longer than 1ms. 

 and MAX indicators 

turn on. The meter beeps when new MAX (maximum) or MIN 
(minimum) reading is updated. Press the button to read the 
MAX , MIN, and MAX-MIN (peak to peak) readings in sequence. 
Press the button for 1 sec. or more to exit the crest mode. Auto-
ranging (up range) remains, and Auto Power Saving is disabled 
automatically in this mode.

4-12 MAX/MIN/AVG Recording Mode

When this mode is activated, the reading update rate will be 
increased to 20 times/sec. in the voltage measurement or 
current measurement function, and the update rate in the other 
function ranges will remain.
Press the REC button to activate the MAX/MIN/AVG recording 
mode. 

 , MAX, MIN, and AVG turn on. The meter beeps 

when new MAX (maximum) or MIN (minimum) reading is 
updated. Press the button to read the MAX , MIN, MAX-MIN 
(peak to peak) and AVG readings in sequence. Press the button 
for 1 sec. or more to exit the MAX/MIN/AVG recording mode. 
Auto-ranging remains, and Auto Power Saving is disabled 
automatically in this mode.

4-13 Relative Measurement

Press the

△

REL button to activate the relative measurement 

mode and 

△

 indicator turns on. The relative measurement mode 

offsets the meter to display relative values against a reference. 
The meter displays its readings subtracting the reading at the 
moment the 

△

REL button is pressed. Press 

△

REL button again 

to exit the relative measurement mode. This feature is available 
also while the MAX/MIN/AVG recording mode. This function 
works only on the main display.

4-14 Back Light

Press the SELECT button for 1 sec. or more to turn the backlight 
on. (Automatically turns off after approx. 30 sec.)
Press the SELECT button again for 1 sec. or more to turn the 
backlight off.

Содержание PC710


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды