![background image](http://html.mh-extra.com/html/sanwa/pc700/pc700_instruction-manual_1198200025.webp)
Battery door
Screw
for the battery door
Battery
Fuse
0.63A/500V
φ
6.3× 32mm
Breaking capacity
:
50kA
Part number
:
F1198
Rear case
Fuse
12.5A/500V
φ
6.3× 32mm
Breaking capacity
:
20kA
Part number
:
F1199
―
4 6
―
―
4 5
―
6-3 Battery and Fuse Replacement
1. Do not open the rear case with live measuring terminals to avoid
electric shock. Also, make sure the meter power is OFF, before
starting replacement.
2. Be sure to use the specified fuse. Neither use unspecified fuse nor
short-circuit the fuse holder.
WARNING
Pre-installed battery
Since the pre-installed battery is for monitoring, it may not be
durable as typically expected.
* The purpose of the battery for monitoring is to check for the
functions and performances of the product.
Replacement procedure
①
Remove the holster and loosen the Philips-head screw fixing
the battery door using appropriate screw driver.
②
Remove the battery door and replace the battery or fuse with
new one.
③
Re-fasten the screw and set the holster again.
6-4 Storage
Save the instrument into an appropriate place, according to the
precautions above.
1. The panel and case are not resistant to volatile solvents. Do not wipe
out with solvents or isopropyl alcohol. Clean the instrument up with a
dry soft cloth.
2. The panel and case are not resistant to heat. Keep it away from heat-
generating devices such as solder irons.
3. Do not save the instrument into vibratory places or where the
instrument may fall off.
4. Do not expose the instrument to direct sunlight and do not save it
into any places with extreme temperature, humid, or condensation.
5. Remove the battery for saving the instrument over a long period of
time.
CAUTION