Sanwa MX-3X, Руководство по эксплуатации

Страница: 28 / 56

Page 28
Choosing the Steering Channel Option
1) From within the 4WS menu, press the Right MENU key. ST1 will be displayed in the
Programming Window.
2) Press the +/INC or DEC/- keys to choose the desired Steering Channel option, either ST1
or ST2.
AUX-ST setting range is ST1 and ST2. The default setting is ST1.
Two Steering Channel options are available as described below:
ST1 - Steering Dual Rate, Exponential, and Servo Speed settings affect Channel 1 Steering Servo only.
ST2 - Steering Dual Rate, Exponential, and Servo Speed settings affect both Channel 1 and Auxiliary Channel 3 Steering
servos equally.
Regardless of choice, Auxiliary Channel 3 Steering servo Steering Dual Rate, Exponential, and Servo Speed are not
adjustable separately.
Activating and using the Four Wheel Steering Mixing Function
1) To Activate and use the Four Wheel Steering Mixing function, move the Auxiliary Lever to the ON position (pushed UP). AUX
will flash in the Programming Window and the Power Indicator Light will flash rapidly.
When the Four Wheel Steering Mixing function is Activated, the following Four Wheel Steering Mixing options are available during use:
Rear Wheel Steering - To Activate Rear Wheel
Steering only, press the Right MENU key. AUX R_ST
will be displayed in the Programming Window and
only the Rear Wheel Steering (Auxiliary Channel 3)
will operate.
Parallel (Normal) Steering - To Activate Parallel
Four Wheel Steering, press the +/INC key. AUX
NOR will be displayed in the Programming Window
and both the Front and Rear Steering will operate
in Parallel.
Tandem (Reverse) Steering - To Activate Tandem
Four Wheel Steering, press the DEC/- key. AUX
REV will be displayed in the Programming Window
and both the Front and Rear Steering will operate
in Tandem.
Front Wheel Steering - To Activate Front Wheel
Steering only, press the Left MENU key. AUX F_ST
will be displayed in the Programming Window and
only the Front Wheel Steering (Steering Channel 1)
will operate.
If the steering servos do not operate as described above, you can use the Servo Reversing function to change the direction
that each servo operates. Do do this, first turn the Four Wheel Steering Mixing function OFF [move the Auxiliary Lever to
the OFF position (pushed DOWN)], then navigate to the REV menu and change the direction of the ST and/or AUX channels.
Re-enable the Four Wheel Steering mixing and test the controls once more to ensure the desired operation.
[[PROgRaMMing MEnU