Sanwa MT-5, Руководство пользователя

Страница: 44 / 78

33
How to Use Each Feature
How to Use Each Feature
● AUX is a feature to set the performance of AUX1 and AUX2 (3ch, 4ch). You can choose from STEP AUX
(STEP), POINT AUX (POINT), 4WS (4-Wheel Steering: Coordinate Phase, Opposite Phase). MOA (Motor
On Axle), AUX-MIX (AUX Mixing: ST → AUX/TH-AUX) and CODE5/CODE10 (Code Communication).
*Setting of AUX TYPE is done in the System Menu. Make a setting according to the purpose of the use.
● Setting Step AUX allows you to set the operating quantity by operating assigned Trim or a switch.
● By factory default, the AUX feature is set to the Step AUX.
1) Select [AUX] with the multi-selector and
define with the Enter operation.
2) Setting Step AUX (STEP AUX)
Determine [CH] to activate with the Select button
and set the position of the motion with the multi-selector.
*Operating quantity can be set with
EPA (End Point Adjustment, P.27, 28).
*Assign the features to Trim and Dial with
Key Assignments according to the used method.
ENTER BACK
Motion Position Display
Secreting a Channel
with the Select Button
● By setting Point AUX and assigning the movement of AUX1/AUX2 (3ch, 4ch) to the switch and Trim, you
can move the servo to the set Point. The Point that moved can be set with EPA (End Point Adjustment).
Adjust the Point position according to the usage.
*Amount of Points will be 2 ~ 6 points and can be set with AUX TYPE
1) Select [AUX] with the multi-selector and set with AUX TYPE.
2) Setting Point AUX (POINT AUX)
Determine [CH] to activate with the Select button and
set the Point of the motion with the multi-selector.
*Set to [POINT AUX] with [AUX TYPE] of [SYSTEM]
according to the usage.
*Assign the features to Dial and Trim with
Key Assignments to operate or operate with the multi-selector.
ENTER BACK
AUX
STEP AUX
AUX
POINT AUX
AUX