Sanwa MT-5 Скачать руководство пользователя страница 36

Страница: 36 / 78

How to Use Each Feature

How to Use Each Feature

●

Fail Safe Operation is a feature to keep the servos in a predetermined position for each channel in the

event that the receiver cannot receive a signal from the transmitter. A feature to keep the servos in a

predetermined position for the servo of the throttle channel (2ch) in the event that the battery voltage on

the receiver side of an engine RC car goes below the set voltage is Battery Fail Safe Operation.

●

Battery Fail Safe Operation cannot be set when the throttle channel (2ch) is set to FREE/HOLD (*Battery

Fail Safe Operation works only for the throttle channel).

*Don't use Battery Fail Safe Operation feature for electric RC cars.

1) Select F/S with the multi-selector and select a channel to set

fail safe operation (ST/TH/AUX1/AUX2) with the select button.

2) Enter the set channel and operate the multi-selector.

The fail safe mode setting changes in order of

FREE

→

HOLD.

○

Setting Range: FREE/FS(-100

～

100%)/HOLD

○

Default: FREE

FREE (Free Mode)

When thre receiver cannot receive the signal from the transmitter, the signal output to the servo stops and

the servo will be free.

FS (Fail Safe Mode)

When the receiver cannot receive the signal from the transmitter, the servo will be held in the set position.

HOLD(Hold Mode)

The last postion before the signal from the transmitter to the receiver is lost will be held.

*When using with Gyro, please set HOLD. In case of FREE, the Gyro might be able to be misworking.

When the receiver can receive the signal from the transmitter again, each mode of FREE/HOLD/FS is

automatically released.

3) Setting the Fail Safe (FS)

Move to the position where the Fail Safe Operation is used. When the position is determined, long press

the Enter key to set the position when the Fail Safe Operation works.

*For safety reason, we recommend setting the throttle channel on the brake side when setting the Fail

Safe.

4) Setting the Battery Fail Safe Operation

After setting the throttle channel position, move the cursor to [B-F/S] to set the voltage.

○

Setting Range: OFF, 3.5v

～

7.4v

*The Battery Fail Safe Operation is a feature to activate

Fail Safe Operation when the receiver battery voltage belows

to the set voltage on a Nitro car.

Don't use the Battery Fail Safe feature on electric RC cars.

5) Checking the Fail Safe Operation

Turn off the power of the receiver while the Fail Safe Operation

is set and check if the servo moves to the position where

the Fail Safe Operation is set.

Setting F/S

F/S Setting Position

BATT-F/S Setting

• About the Fail Safe Operation

When the Fail Safe feature is on, check the setting of the Fail Safe before operating.

Don't change the setting of the Fail Safe during operation.

IMPORTANT

FAIL SAFE [F/S]

SETTING

Содержание MT-5















































































Результаты поиска

Содержание MT-5

Отзывы:

Бренды по названию

Популярные бренды

Sanwa MT-5, Руководство пользователя

Результаты поиска

Содержание MT-5

Отзывы:

Бренды по названию

Популярные бренды