manualshive.com logo in svg

Sanwa M11X, Руководство по эксплуатации, Страница: 39 / 67

Поделиться
Скачать
Sanwa M11X Скачать руководство пользователя страница 39

Page 39

throttle hold

The Throttle Hold function is used primarily with glow- or gas-powered models. It allows you to perform several different functions 

depending on how the Throttle Hold function is set up. For example, when set to a negative value, you can stop the engine 

with only the press of a button. This feature is often used with R/C boat models and is also known as 'Engine Cut'. When set to 

a positive value, the throttle can be held open a desired amount with only the press of a button. This feature is often used to hold 

the engine at a steady idle while refueling during a race. With the transmitter set to 4CH Mode, a desired amount of braking can 

be applied independently when set to a negative value.

Function Page 2 (TH-HLD)

140%

-160%

0%

High Side

Brake Side

Neutral TH-Hold

Position

Indicates Throttle Servo Travel

When TH-HLD is active, the throttle servo is locked to the TH-HLD value, regardless of the current throttle trigger position.

 

INH

 - Throttle Hold is not active. Depress and hold the Push-Button 

switch  to  activate  Throttle  Hold.  When  released,  normal  throttle 

operation returns.

 

ACT

 - Throttle Hold is active at all times. Press and hold the Push-Button 

switch to turn Throttle Hold OFF. When released, Throttle Hold will be 

active again.

The  THROTTLE  HOLD  function  must  be 

assigned  to  a  Push-Button  switch,  using 

the Key Assign function. See page 50 for more 

information.  We  suggest  assigning  it  to  its  own 

switch, for example, Sw 2.

Throttle Hold Setting

1)  Press the Function key to highlight the TH-HLD menu. The cursor will 

default below THROTTLE HOLD in the Programming Window.

2)  Press INC/+ or DEC/- keys to adjust the desired TH-HOLD value.

TH-HLD THROTTLE HOLD setting range is -160% to 140%. The default 

setting is 0%. The THROTTLE HOLD setting controls how far the throttle 

servo will travel with TH-HLD is activated.

INH/ACT Setting

1)  Press the ENTER key to move the cursor to TH-HOLD in the Programming 

Window, then press INC/+ or DEC/- keys to set the desired value.

4CH Hold Setting

1)  Press  the  ENTER  key  to  move  the  cursor  to  HOLD-4CH  in  the 

Programming  Window,  then  press  INC/+  or  DEC/-  keys  to  set  the 

desired value.

TH-HLD HOLD-4CH setting range is ON or OFF. The default setting is 

ON. When set to ON the 4th channel brake will activate when TH-HLD is 

activated. When set to OFF the 4th channel brake servo will not activate 

when TH-HLD is activated.

The 4th channel brake servo will only activate when TH-HLD is set to a negative value. The 4th channel brake servo travel 

will be the same amount as the TH-HLD travel. For example, if your throttle servo moves 20 degrees, the 4th channel brake 

servo will also move 20 degrees.

Содержание M11X




































































Отзывы:

Нет отзывов