Sanwa ExzesX Скачать руководство пользователя страница 58

Страница: 58 / 68

Page 58

FUncTiOn PagE F3

BaTT (BaTTERY MEnU)

Function Page 3 (BATT)

The Battery menu function is provided for display purposes only. When the Battery

menu is selected, the current voltage of the transmitter batteries is displayed and the

current 'on time' of the transmitter is displayed. In addition, you are able to quickly

switch between the Logo display and the User Name display in the Programming

Window.

Transmitter Battery Voltage

When the transmitter is turned ON for the very first time, the BATT menu on Function Page 3 is displayed. When the transmitter is

subsequently turned ON, the last menu and Function Page that was displayed when the transmitter was turned OFF is displayed.

Transmitter battery voltage is displayed on two different areas of the Multi-Function LCD. Transmitter battery voltage is displayed

in the Programming Window and in the Information Window. Transmitter battery voltage is displayed in decimal value increments

of 0.1 volts. Operating voltage is 6.5 volts to 11.0 volts. Normal operating voltage is ~7.5 volts.

Battery Voltage

Programming

Window

Low Voltage Alarm

When the transmitter battery voltage drops to 6.7 volts, the transmitter's Low Voltage Alarm will sound and the transmitter will

vibrate (if the Vibrate function is Activated in the SET-UP menu). This will continue every 30 seconds. When this occurs, promptly

stop operation and replace or recharge the transmitter batteries. Continuing to use the transmitter after the low voltage alarm

sounds can result in loss of control of your model.

Transmitter Operating Timer (On Time)

The Operating Timer is a Count-Up Timer that records the time the transmitter has been turned ON in hours and minutes. The

Operating Timer can be reset to 00:00 by pressing the INC/+ and DEC/- keys at the same time (only in the BATT menu).

Information

Window

Operating Timer

Logo and user Name Displays

While in the BATT menu, press the ENTER key to

switch between the Logo display and the User Name

display in the Programming Window. For more

information about creating a User Name, see page 52.

Resetting the Operating Timer after you have

replaced or recharged the transmitter batteries

will give you the amount of time the batteries have

been in use.

Содержание ExzesX





































































Результаты поиска

Содержание ExzesX

Отзывы:

Бренды по названию

Популярные бренды

Sanwa ExzesX, Руководство по эксплуатации

Результаты поиска

Содержание ExzesX

Отзывы:

Бренды по названию

Популярные бренды