Sanwa ExzesX, Руководство по эксплуатации

Страница: 34 / 68

Page 34
FUncTiOn PagE F2
Stopping the Lap Timer
1) The Lap Timer can be stopped and the Lap Time cleared using three
different methods:
A) By pressing the Lap Timer switch after the GOAL Time is reached.
B) By pressing and HOLDING the Lap Timer Switch for 3 seconds.
C) By pressing the INC/+ and DEC/- keys at the same time.
When the Lap Timer is stopped, the Lap Timer function is automatically turned OFF. To turn the Lap Timer function back
ON, see the Turning On the Lap Timer section on the previous page.
Verifying Lap Timer Results
1) Lap Timer results can be checked by pressing the key in the
TIMER [LAP] menu while the Lap Timer is stopped. The display
shows lap times for 9 different laps on each page. Press the
INC/+ or DEC/- keys to scroll through the different pages.
Press the INC/+ and DEC/- keys at the same time to return to the first 9 laps displayed.
[INT] INTERVAL TIMER
The Interval Timer function notifies you when a set interval elapses while you are driving, giving you an idea of how close you are
to your target time. There are two separate Interval Timers. One Interval Timer for minutes and seconds, and one Interval Timer
for seconds and 1/10th seconds. Both Interval Timers can be used simultaneously and different audible tones can be assigned
to each Interval Timer to help you differentiate them during use.
The Lap Timer function can be assigned to any Push-Button switch, using the Key Assign function. For more information,
see page 49.
Sw3
The Cumulative Time cannot be manually cleared. It will be automatically cleared when the Lap Timer is restarted.
Each time you press the Lap Timer Switch, the switch is deactivated for 3 seconds.
Starting the Lap Timer
1) To start the Lap Timer, press the Lap Timer Switch. In the default configuration,
the Lap Timer Switch is assigned to Sw3. The Lap Timer will start counting up.
Pressing the Lap Timer switch a second time will store the first Lap Time, then
begin counting a second Lap Time and display the Cumulative Time. Each time
you press the Lap Timer Switch, the previous Lap Time is stored, a new Lap Time
begins, and the Cumulative Time is displayed.
Turning On the Interval Timers
1) Press the Function key to move the cursor to [INT] in the Programming
Window. The cursor will default to OFF.
2) Press INC/+ or DEC/- keys to turn the Interval Timers ON.
Press the key a second time to return to the TIMER [LAP] menu.