Sanwa CD770, Инструкция по эксплуатации

Страница: 37 / 56

— 6 —
[4] DESCRIPTION OF FUNCTIONS
4-1 Power Switch & Function Switch
Turn this switch to turn on and off the power and select a
measuring function.
4-2 Measuring Function Selection:
When the button is pressed, the functions change as
follows:
s
V position: DC voltage ( ) AC voltage ( ) DC voltage ( )
s
/ / position: Resistance measurement ( ) diode test ( )
continuity check ( ) resistance measurement ( )
s
μA position: DC current ( ) AC current ( ) DC current ( )
s
mA position: DC current ( ) AC current ( ) DC current ( )
4-3 Data Hold:
When the button is pressed, the value indicated will be
held. (“ ” will appear on the display.) The indicated value will not
change if the measurement input fluctuates.
When this button is pressed again, the hold status will be
canceled and the meter will return to the measurement mode.
(“ ” will disappear from the display.)
Remarks:
The DATA HOLD button does not work with the function.
4-4 Range Hold:
When the button is pressed, the meter will be set in the
manual mode and the range will be fixed. (“ ” will disappear
from the display.) In the manual mode, each time this button is
pressed, the range changes. While checking the unit and decimal
point on the display, select the best range.
To return to the auto range, hold this button pressed for 1 second
or longer. (“ ” will appear on the display.)
Remarks:
The RANGE HOLD button does not work with the ( ), ( ),
( ) and ( ) functions.