33
ESPAÑOL
PASO 2C
Opción para hormigón sólido o bloques de cemento
PRECAUCIÓN:
Evite lesiones y daños materiales.
●
Instale la placa mural
11
directamente sobre la superficie de hormigón.
●
Espesor mínimo del hormigón: 203 mm (8")
●
Tamaño mínimo del bloque de cemento: 203 x 203 x 406 mm (8" x
8"
x 16")
●
Espacio horizontal mínimo entre los elementos de sujeción: 406 mm (16 pulgadas)
1. Coloque la plantilla de la placa mural
10
en la pared a la altura que desee. Nivele la plantilla de la placa mural y marque la ubicación de
los orificios.
NOTA:
Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com.
2. Haga los cuatro orificios guía con una mecha de 10 mm (3/8") de diámetro.
IMPORTANTE
:
Los orificios guía deben realizarse hasta una profundidad de 101 mm (4"). Nunca perfore el cemento que une los bloques.
3. Retire la plantilla de la placa mural
10
e inserte cuatro anclajes
14
.
PRECAUCIÓN:
Cerciórese de que los anclajes
14
queden nivelados respecto de la superficie de hormigón.
4. Coloque parcialmente los dos pernos tirafondo superiores
13
, dejando aproximadamente 13 mm (1/2") de espacio desde la pared.
NOTA:
Este espacio le permite colgar la placa mural
11
en los pernos superiores
13
.
5. Deslice las cubiertas abiertas sobre la placa mural
11
para que los orificios de montaje queden expuestos.
6. Cuelgue la placa mural
11
sobre los pernos superiores
13
.
7. Coloque los dos pernos tirafondo inferiores
13
. Ajuste los cuatro tornillos tirafondo solamente hasta que queden firmes contra
13
la
placa mural
11
.
NOTA:
Sostenga la placa mural
11
en su lugar mientras ajusta el primer perno
13
para evitar que se mueva fuera de su sitio.
PRECAUCIÓN:
El uso indebido podría reducir la capacidad de retención de los tornillos tirafondo
13
. NO ajuste en exceso los
tornillos tirafondo.
8. Deslice las cubiertas cerradas sobre la placa mural
11
.
Содержание VMT5
Страница 27: ...27 ...