Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING:
A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING:
Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING:
Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
may have a maximum drywall thickness of 5/8" (1.6cm).
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the VMD2 Monitor Arm
up to (and including) the display does not exceed 40 lbs
(18.14 kg) for single arm mounts or 25 lbs (11.34 kg) per arm
on dual arm mounts. Use with products heavier than the
maximum weight indicated may result in collapse of the
mount and its accessories causing possible injury.
DIMENSIONS
Milestone AV Technologies, a Duchossois Group Company.
All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identification
purposes and are trademarks of their respective owners.
VMD2
(6901-002124 <00>)
3.94
100
2.95
75
11.41
MAX 21.04 [534.2]
289.7
5.19
131.7
3.00
76.2
CABLE
MANAGEMENT
90 INTERFACE
ROTATION
7.41
(8.85 [224.7] FOR
LOWER PROFILE INSTALL)
188.1
.50
MAX 3.25 [82.6]
12.7
DESKTOP
THICKNESS RANGE
9.63
244.5
MANUAL HEIGHT
ADJUSTMENT RANGE
MAX 19.2 [487.7]
EXTENSION
PITCH
TENSION
KNOB
PITCH
RANGE
15
HEIGHT
ADJUSTMENT
KNOB
LOWER PROFILE INSTALL
LOWER
PROFILE
VMD2
