17
1 in. (25 mm)
1/2 in.
(13 mm)
16
16
4X
Place the wall plate template
16
at your desired height and position the
slotted holes over your stud center lines. Level and mark the hole locations.
4
POSITION TEMPLATE
TIP:
To calculate your precise wall plate location, check out
our Height Finder at sanus.com [
www.san.us/1172
].
www.
san.us/1172
HeightFinder™
Visit
Drill the four pilot holes using a 1/2 in. (13 mm) diameter drill bit.
IMPORTANT:
Pilot holes must be drilled to a depth of 1 in. (25 mm).
Remove the wall plate template and discard.
5
DRILL
CAUTION:
Be sure you drill into the CENTER of the stud.
