13
4
3
3. Remove the template
07
and insert two anchors
C1
(Fischer UX 10 x 60R - included in the Concrete Installation Kit CMK1
*
).
CAUTION:
Be sure the anchors
C1
are seated flush with the concrete surface.
4. Install arm assembly
08
using two lag bolts
09
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
09
.
*
Contact Customer Service
to inquire about the
Concrete Installation Kit CMK1.
*
C1
09
08
