Sanus BMT1, Инструкция по эксплуатации

Страница: 14 / 48

14
06 06
4. Place the wall plate template
06
at your desired height and position the MIDDLE HOLES over your stud center lines. Level the wall plate
template
06
and tape in place.
CAUTION:
Avoid potential personal injury or property damage! You MUST install using the center holes in the stud as shown.
NOTE:
For assistance in determining wall plate location, see HeightFinder at sanus.com.
IMPORTANT
: Be sure you mark and drill into the center of the stud.
5. Drill the middle two pilot holes (into the stud) using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4 5
3 in. (75 mm)
7/32 in.
(5.5 mm)