19
4
2
3
17
17
17
17
Arrange cables on
either side of the clips.
Reattach tunnels
17
to clips
15
and clip
16
, capturing the
cables behind them.
Press firmly along the
length of the tunnels
where the clips are
located until clips
snap in place.
NOTE:
Leave enough
slack in the cables above the
tunnel to prevent them from
interfering with or rubbing
against the tunnel when
moving the TV. This could
cause the tunnel to separate
from the clips.
TIP:
Use tape the hold the
cables in place during install.
Carefully lift tunnel
assembly and
position it at the
desired location
making sure it is level.
Press firmly for 10
seconds at each
clip location along
the length of the
assembly to secure
the clips
15
and
clip
16
to the wall.
Peel the
tunnels
17
away from
the clips
15
and
16
.
15
16
15
15
16
