SANUS VuePoint F55c, Инструкция по эксплуатации

Страница: 9 / 48

9
17
4
3
3 in.
(75 mm)
7/32 in.
(5 mm)
15
14
16
17
3. Drill pilot holes using a 7/32 in. (5 mm) diameter drill bit. Remove wall plate template
14
.
IMPORTANT : Be sure to drill into the center of the studs.
IMPORTANT : Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate assembly
15
using four lag bolts
16
and four washers
17
. Tighten the lag bolts only until they are pulled firmly against the
wall plate.
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement
of the wall plate
15
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.