Step 1: Add feet
Add a Foot (o) to each pillar of each Side Panel Assembly (t) as shown in Diagram 1. If you wish to install the Carpet Spikes (a), thread
each Carpet Spike into the foot as seen in Diagram 1. You can adjust the height of the Carpet Spikes with the Nut shown in the Detailed
View of Diagram 1.
Warning: The ends of the carpet spikes are sharp and may scratch floors or furniture. All sharp objects can be hazardous to
children. For this reason we provide the carpet spikes as an option. Sanus Systems will not be liable for damage or injury.
Diagram 1
Detailed View
t
o
a
Step 2: Attach the Front Rails to the Side Panel Assembly
Attach the Front Rail (r) to the Side Panel Assembly (t) by sliding the clamp down the groove in the Side Panel pillar as shown in the Top
View A of Diagram 2. Make sure the flat smooth side of the Front Rail is facing outward, as shown in Diagram 2. Once the Front Rail is
positioned at the bottom of the groove and resting on the Foot (m), tighten the allen bolt on the back side of the Front Rail so the clamp
widens to hold the Front Rail firmly in place. Repeat process for the other Front Rail, making sure it is level with the corner pillar.
Top View A
Diagram 2
(Front Left Corner)
t
allen bolt
clamp
r
