9
3
4
3. Drill pilot holes using a 5.5 mm (7/32 in.) diameter drill bit. Remove wall plate template.
IMPORTANT
: Be sure to drill into the center of the stud.
IMPORTANT
: Pilot holes must be drilled to a depth of 75 mm (3 in.).
4. Install the wall plate
15
using lag bolt
16
and washers
18
. Tighten the lag bolts and washers only until they are pulled firmly against the
wall plate.
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts
16
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
15
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
15
16
18
14
75 mm (3 in.)
5.5 mm
(7/32 in.)
