sanus accents PLA50B, Инструкция по эксплуатации

Страница: 7 / 10

6904-002012 <01>
7
3
Wall Mounting - Solid Concrete
and Concrete Block
3-1
Level wall plate [01] and mark hole locations
13 mm
(1/2 in.)
13 mm
(1/2 in.)
[16]
[17]
[01]
[01]
3-3
Drill pilot holes as illustrated
3-4
Tighten lag bolts [17] only until the washers [16] are pulled fi rmly against the wall plate [01]
3
Wall Mounting - Wood Stud - continued
CAUTION:
Improper use could reduce the holding power of the lag
bolt. To avoid potential injuries or property damage: pilot holes MUST be
drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill
bit.
CAUTION:
Improper use could reduce the holding power of the lag
bolt. To avoid potential injuries or property damage DO NOT over-tighten
the lag bolts [17] .
75 mm
3 in.
CAUTION:
Avoid potential personal injuries and property damage!

Mount the wall plate [01] directly onto the concrete surface.

Minimum solid concrete thickness: 8 in.

Minimum concrete block size: 8 x 8 x 16 in.