11
3
4
14
15
63.5 mm
(2
½
in.)
3 mm
(1/8 in.)
16
3. Drill pilot holes using a 3 mm (1/8 in.) diameter drill bit. Remove wall plate template
14
.
IMPORTANT
: Be sure to drill into the center of the stud.
IMPORTANT
: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.).
4. Install wall plate
15
using lag bolts
16
. Tighten the lag bolts
16
only until they are pulled firmly against the wall plate
15
.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
