11
3
4
Install the wall plate
07
using four lag bolts
08
and washers
09
.
Tighten all lag bolts only until they are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the
lag bolt.
DO NOT over-tighten the lag bolts
.
Go to STEP 3 on PAGE 19.
Drill pilot holes then remove the wall plate template
06
.
IMPORTANT
:
Be sure to drill into the center of the stud.
IMPORTANT
:
Pilot holes must be drilled to a depth of
2
¾
in. (70 mm), using a 7/32 in. (5.5 mm) diameter drill bit.
2
¾ in. (70 mm)
7/32 in.
(5.5 mm)
08
09
07
06
