SANTOS : User and maintenance manual
IMPORTANT SAFEGUARDS
When using, cleaning or maintaining the machine, always follow these instructions:
Read all instructions
Note: You will find it easier to understand the next few paragraphs if you refer to
the diagrams at the end of this manual.
IMPROPER USE
1. Never operate the machine without coffee beans in the bean container.
!
2. Do not use this machine for grinding anything other than roasted
coffee beans.
3. Remove from the coffee beans any foreign bodies which may damage
the grindstones (metal staples, stones, etc.).
4. Cleaning in a jet of water or a high pressure spray is prohibited.
5. The base (11) must not be immersed in water.
ELECTRICAL CONNECTION
•
The electric power supply for the machine is available in 3 single-phase voltages:
-
110-120 V 50/60 Hz:
-
220-240 V 50 Hz:
-
220-240 V 60 Hz:
Line protection
: the machine should be connected to a standard 2-pole + earth electric
socket. The system should be fitted with an RCD and a fuse rated at 16A.
The appliance
must be earthed
.
CARE:
•
Before connecting the machine, check that the mains electrical voltage is the same
as the voltage for your appliance. Its value is shown:
¾
either on the identification plate under the machine.
¾
or on the identification plate on the last page of this manual.
•
If the power cable is damaged, it should be replaced by a special assembly available
from approved SANTOS dealers or from SANTOS.
CARE:
Check
that the On / Off switch (
13
) is in the
0 position
before
connecting the power cable plug to your mains electric
power socket (fig. A).
!
!
98101 US 3.0 - 09 2007
4
/ 20
www.santos.fr
