ASSEMBLY INSTRUCTIONS
SINUS PENTA
MODULAR INVERTERS
42/
47
3.
WIRING
ACCESSORIES
The following accessories are standard supplied to contain the signal cables connecting the boards installed
on the inverter modules:
-
Cable raceways to be installed on the inverter legs (see Figure 24);
-
U-bend to link the inverter legs (see Figure 24);
-
Junction plates for the inverter sections (see Figure 25);
-
Cable raceway covers (see Figure 25);
-
Linking tubes for wiring internal to the modules (see Figure 26);
-
Bottom covers (see Figure 26);
-
Velcro items for cover fastening (see Figure 27);
-
Clamps to fasten the mechanical links (see Figure 27);
-
Rivets made of plastic to fasten the covers (see Figure 27).
Figure 24: Cable raceway to be installed on the inverter legs (A) and U-bend joining the inverter legs (B)
Figure 25: Cable raceway closure cover (C) and linking tube for wiring internal to the modules (D)
