Bedienungsanleitung / User Manual VTC-HDH322P / VTC-HDH352P / VTC-HDH352P/W
_________________________________________________________________________________
- 26 -
5. Adjustments
Lens adjustment for VTC-HDH322P:
(picture 4a)
Lens control (focal length and focus) is done by the two setting rings.
Carefully loosen the two safety screws a bit so that you are able to turn the setting rings.
Adjust the lens according to your needs. Finally, seize the two safety screws again carefully.
Lens adjustment for VTC-HDH352P, VTC-HDH352P/W:
(picture 4b)
This camera is equipped with an EasyFocus lens with 2.8 – 10 mm. This lens has a wide
picture sharpness range; no need to adjust the focus separately. The adjustment of the focal
length is done via a mini-joystick which can be moved left or right (TELE or WIDE).
OSD adjustment:
The camera adjustments are done by an OSD (on-screen-display) menu. On the camera you
will find a mini-joystick. Press onto this joystick and a menu pops up in the video picture. You
can now move the joystick left/right/up/down in order to get to the desired menu item. For
confirming your choice, press onto the joystick.
See chapter “Camera adjustments via OSD menu” for further details.
Additional video connection:
(picture 3)
This additional video connector can be used with the included adapter, e.g. if you want to
install a monitor during the installation phase in case the regular video cable has already
been laid.
Electronic water level (VTC-HDH352P, VTC-HDH352P/W):
(picture 6)
Cameras VTC-HDH352P and vTC-HDH352P/W are equipped with an electronic water level.
It has 2 LEDs which serve as electronic adjustment tool to ensure a horizontal display of the
picture.
LEDs are off:
The camera is horizontally correct installed.
Left LED is flashing:
Turn the camera body to the right until the LED goes off.
Right LED is flashing:
Turn the camera body to the left until the LED goes off.
Both LEDs are flashing:
Rotate the camera body by 180° because your camera is
positioned
upside
down.
