Bedienungsanleitung / User manual
VTC-262HWD, VTC-322HWD, VTC-369IRHG, VTC-369IRHW,
VTC-432IRHWD, VTC-279IRHWD, VTC-289IRHWD
_________________________________________________________________________________
- 49 -
2. General installation
This camera has been designed for video surveillance applications. The appliance must only
be installed by qualified service personnel and has to comply with local specifications and
regulations.
Make sure to fix the camera onto a solid basis (wall or ceiling) which is capable of carrying
the weight of the camera. Ensure that the camera is safely installed by using only suitable
screws.
2.1 Power supply and monitor impedance
Only use a stabilised 12 V DC or 24 V AC power supply unit with sufficient wattage (see
chapter “Technical specifications” for recommended power supply units).
Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be 75 Ohm. Verify the
connection in case the video picture is of poor quality.
On the camera, you will find an additional video connection.
A cable adapter BNC socket/plug is included in the delivery which can be put onto the
additional video connection, e.g. to connect a monitor during the camera installation phase in
case the regular cable has already been laid.
2.2 Connections
The following connections/adapters are included in the delivery:
Video connection
(BNC socket)
Power connection
(DC socket)
Cable adapter/
screw connector
Cable adapter BNC socket,
e.g. for monitor connection
during installation phase
