Bedienungsanleitung / User Manual
VTC-261IRP
_________________________________________________________________________________
- 21 -
3. Adjustments
3.1 OSD
All camera adjustments are done via an OSD menu. On the camera there is a mini-joystick.
Press onto the joystick and a menu pops up in the video picture. You can now move the
joystick left/right/up/down in order to get to the desired menu item. For confirming your
choice, press onto the joystick.
See chapter 5 “Camera adjustments via OSD menu“ for more information.
3.2 Lens
The camera module can be set via 3 axis which makes it possible to have customised
settings, e.g. in case of wall mounting.
1. turn the whole bracket
2. up and down
3. turn the camera module (loosen the screw and tight it again after adjustment has
been completed)
For making adjustments, loosen the screws carefully.
After the adjustments have been made, tighten the screws again carefully.
To achieve the correct angle of view, turn the zoom ring until you get from a wide angle to a
near angle or vice versa. Use the second ring to adjust the sharpness.
Also see picture 2a and 2b.
