User manual
SNVR-1412P, SNVR-1812P
_________________________________________________________________________________
- 43 -
7.5.2.10
Main menu
Setting
Network
Multicast
Multicast describes the transmission of information from one point to a group (one-to-many
distribution). Information (data) is transmitted to several recipients or a group simultaneously.
The information packet is sent only once even if it need to be delivered to a large number of
recipients. Hence data packets can be sent efficiently to several recipients at the same time.
This is done using special multicast IP addresses.
IP-address:
Valid range for multicast group: 224.0.0.0 to 239.255.255.255 (for IPv4), i.e. you can
use the following IP for multicast:: 235.8.8.36
Reserved ranges: 224.0.0.0 to 224.0.0.225, e.g.:
o
224.0.0.1: All systems in the sub net
o
224.0.0.2: Al routers in the sub net
o
224.0.0.4: DVMRP router
o
224.0.0.5: OSPF router
o
224.0.0.13: PIMv2 router
Administrative addresses: 239.0.0.0 to 239.255.255.255: Cannot be used for Internet
transmissions.
7.5.2.11
Main menu
Setting
Network
P2P setting
Here you can scan the QR code to call-up the P2P App.
7.5.2.12
Main menu
Setting
Network
Alarm center
Here you can define whether and when an alarm report is to be created.
7.5.2.13
Main menu
Setting
Network
Auto register
You may use this function so that the recorder automatically registers at a proxy. The proxy
serves like a switch.
Enter the IP, port and proxy IP and tick “Enable“.
7.5.2.14
Main menu
Setting
Network
Switch
Here you can define the IP address, subnet mask and gateway for the switch.
