User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
_________________________________________________________________________________
- 80 -
7.8.2 Time
Make sure to set up your date and time prior to start recording.
Use the left/right buttons [
] to select the tab
menu “Time”. The menus are displayed with
options on the left-hand column and settings in the right hand column. A cursor (highlighted
menu) can be moved using the direction buttons [
]. Press the [-, +] buttons to change
the values.
1. Time zone:
Select the time zone in which the DVR is located. The DVR contains DST setting
(Daylight Saving Time). If you choose a time zone with DST, there is no change in the
system time stamp for recorded data. When the Daylight Saving Time ends, the DVR
automatically adjusts the time.
2. Date format:
Select the format to display the date:
MM/DD/YYYY
DD/MM/YYYY
YYYY/MM/DD
3. NTP synchronisation:
The internal time of the DVR can be synchronised with an external time source using
NTP (Network Time Server). If the NTP option is ON, the date and rime option are
inactive.
4. NTP server:
Allows you to use a public or private NTP server. Enter the IP address of the sever or
the domain. The default setting for a public server is
“pool.ntp.org”.
Note: Time synchronization intervals: min. 64 sec, max. 1024 sec
5. NTP test:
Test whether the NTP server works properly.
6. Date and time:
Set the current time and date.
To save changes and exit the menu, press the [MENU] button.
To exit the menu without making changes, press the [CANCEL] button.
