User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
_________________________________________________________________________________
- 79 -
7.8 System
7.8.1 General
1.
Control ID:
Each DVR that is preconfigured with the control ID, can be operated by the remote
control. To select the DVR to be controlled with the remote control, press and hold
the DVR ID button. While holding the DVR ID button, press the appropriate DVR ID
number.
Example:
Enter
“05” for DVR ID 05, enter “43” for DVR ID 43, and so on. If you enter “00”, all
DVRs
– irrespective or their ID – will be controlled at the same time.
2.
DVR Name:
Assign a name to the DVR, especially when you have several DVRs in the network.
3.
Key tone:
By default, the DVR emits a beep every time a button is pressed. Set the key tone to
“OFF” to turn the button beep off. Default setting is “ON”
4.
PB Deinterlace:
ON: Reducing image flickering but less picture quality.
OFF: Better picture quality for still image but having flicker for moving pictures.
5.
Auto logout:
You can configure the DVR to automatically log out users. Default setting is
“OFF”.
[OFF
1 minute
3 minutes
5 minutes
10 minutes]
6.
SMART monitor:
Turn ON or OFF to display HDD information.
7.
Key sensitivity:
Set the sensitivity of the keys on the DVR front panel.
