Santa Fe KF-P32, Инструкция по установке и эксплуатации

Страница: 7 / 11

7
Santa-Fe-Products.com Santa Fe Air Purifier Installation & Operation Instructions
F E A T URE S A ND OP E RA T ION
Display Turn Off Function: Press and hold the “Sleep” button for 2 seconds to turn off the
display and buttons, only the “Power” button will be lit at one-third brightness. Touching any
button will illuminate the display, at which point the buttons will function as usual. After 15
seconds without any operation, the display will turn off again. Press and hold the “Sleep”
button to exit display turn off function.
Filter Change
When air puriͤer reaches 3,000 working hours, the ͤlter change indicator icon in the display
will flash red to remind user change ͤlter until the ͤlter is changed. After ͤlter is changed, in
standby mode, press the “Speed” button two times, then hold this button for 2 seconds, ͤlter
change indicator icon will flash quickly. Five seconds later the whole display flashes for a
second and then turn off to enter in standby mode indicating the ͤlter change is complete.
Now, touch “Power” button to switch on the air puriͤer.
Note: 3,000 hours is calculated based on low speed. It will remind ͤlter change less than
3,000 hours if the air puriͤer works in other speeds.
Protection
The air puriͤer has a protection function. When the ͤlter cover is removed or not installed
well, the air puriͤer will automatic cut off.
Maintenance
After using the air puriͤer for an extended period, dust on the sensor will affect its sensitivity.
We suggest cleaning the unit every two months. But time can be shortened or extended
according to indoor environment.