Santa Barbara Instrument Group STXL Advanced Series, Руководство по эксплуатации

Страница: 26 / 33

Appendix B - Capturing a Good Flat Field
This appendix describes how to take a simple flat field. A good flat field is essential for
displaying features little brighter than the sky background. The flat field corrects for
pixel non-uniformity, vignetting, dust spots (affectionately called dust doughnuts), and
stray light variations. If the flat field is not good it usually shows up as a variation in sky
brightness from on side of the frame to the other.
B-1. Technique
The first consideration in capturing a flat field is to use the telescope-CCD combination
in exactly the configuration used to collect the image. This means you probably have to
capture the flat field at the telescope. Do not rotate the head between image and flat field,
since the vignetting is usually slightly off center. Do not be tempted to build a little LED
into the telescope or camera for doing flat fields; it doesn't work at all. The dust debris
shadows would be different!
Arrange a light source such as a flashlight, two white cards, the telescope and
CCD as shown in Figure D-1.
Figure D-1: Flat Field Geometry
Flashlight
Flat White
Surface
Flat White
Surface
Telescope
CCD
The key aspects of this geometry are that the reflection off two diffuse surfaces is used,
and the large flat surface is square to the illumination from the small flat surface. When
we do this, the first flat surface is typically a white T-shirt worn by the operator! Take
care that no apparent shadows are cast onto the larger flat white surface. Use an exposure
at the camera that yields an average light level equal to about half of full scale.
26