1.Preface
1.1 Applicable area
This test manual is applicable for
KDLXXMSXXQ(A)
LCD TV.
1.2 Test notes
1.2.1 Please follow the pointed test steps and choose the proper test equipment to conduct
adjustment, otherwise good effect of TV set could not be obtained. Pointed bias voltage value
should be ensured during test to get satisfied test result.
1.2.2 Be sure that you have the static electricity –protective glove in before test.
2 Test environment
1
）
Temperature
：
15 ~ 35°C
2
）
Relative humidity 45 ~ 75%
3
）
Air pressure: 86 ~ 106kPa
3 Test equipment
Test equipment below must be calibrated
1) Computer (With serial, parallel)
1 set
2) Multi-meter (VICTOR VC9801)
1 set
3)Video Signal Generator(ChromaModel2227/2327/VG859) 1 set
4) Color Analyzer (Chroma Model 7120 ) 1 set
5) TV Video Signal Generator (FLUKE PM54200) 1 set
6) USB Mass Storage Device
（
Only be used in sets with USB function
）
1 set
7) Remote controller with factory keys 1 set
8)AV
，
VGA
，
YPbPr/YCbCr
，
HDMI Signal line etc 1 set
9) Burner such as all-11 or BeeProg 1 set
4.Test item and method
Test items
Equipments
Requirements
Procedure and SPEC
1. M/B
Voltage confirmation
Digital Multimeter
Please refer to appendix
4.1/4.2/4.3 if there is
abnormal phenomenon.
2. Software writing
and Upgrade
PC
Debug Tool
Please refer to appendix
4.5/4.6 or follow the RD
engineer guidance.
3.
HDMI
EDID
writing
No need.
4. HDCP KEY writing
PC
Debug Tool
Please refer to appendix
4.6.
5. Enter and exit the
factory menu
Remote control
Method: press “MENU”
button on the remote
control and then press
“2”, “0”, “0”, “8” in 3
seconds, and enter the
factory menu in success.
Press EXIT button to
exit the factory menu.
6.Initialization
parameters
（
Transferred
to
default values
）
Enter the factory menu,
and select “Reset” and
click "OK" button, the
confirmation
pop-up
menu,
select
"Yes",
